You’ll need modge podge, a couple different colors of paint, at least one sponge brush and wood. I like to have a couple different sizes so that I get a good variety of blocks-so I have a 2×4 and a 2×3.
Next you will need to pick out your stickers-these are Doodlebug Designs, and I used both sheets. A good set of blocks though, only needs about 10 different stickers, so keep your eyes open for something that your kids will love. My set ended up having well over 30-a bit much, but my kids LOVE blocks.
Next cut out your stickers leaving the backs on, this will make it easier to measure the size of your blocks.
Now take your stickers and place them on the wood, using a ruler or something else with a straight edge, mark the size you would like each block with a pencil, remembering to leave room for the saw blade and what will be taken off in the sanding process.
Then label each block with what sticker goes on it for reference later on, this is especially helpful if you are doing a lot of blocks.
Then cut your wood…with a saw…unless you don’t have a saw…
Then, I guess you could use a really sharp butter knife…:)
Then you have this.
Then comes the tedious part.
First choose the sanding tool of your choice.
I of course do not like to kick it old school, so the natural I had no choice was to sand by hand.
I now have a belt sander, because of this project. But at the time of writing this tutorial I had to rely on a piece of sandpaper
Anyway back to the tutorial at hand…
Here are all the sanded beasts.
As you can see I labeled the table where I set the block after being sanded, because I sanded off some of the labels on the blocks, and I am about to cover the rest with paint.
See? Depending on the color of your base coat, you might have to do two coats like I did.
Then you are going to let them dry before mixing your paint for the edges.
For the edges you’ll want to water your paint down a little bit, and you won’t need very much paint for this step.
Now paint the edges around your block, it’s alright if it’s a little messy.
Get all the edges….
Then take a napkin or a paper towel and wipe it off!
Then you will have this distressed effect around your edges.
I got a little messy on mine, and I like it, all the blocks are unique and I think look really cool.
After you are all done with your edges, it’s time to put the stickers on.
My kids helped me with this part, giving the animals food, coconuts in the trees, birds on the hippo’s back (that’s what they do mom, we saw it on Wonder Pets).
Now we are onto the next tedious part.
These blocks take SEVERAL coats if you want to make sure the stickers actually become part of the block.
Which you do, right?
It’s all worth it in the end though-you have a great set of blocks, that will last for years and years.
Your kids might even pass them down to their kids.
Thanks so much Michelle, it’s been a blast taking over your blog for the day!